Electrician in
Keller, TX
Keller is built on bigger lots than most of the towns we cover, with larger and often custom houses on them. Bigger houses do not just need more of the same work — they need it planned differently.
Oncor Owns The Wires In Keller
Keller is Oncor territory. Your retail provider sells you power; Oncor owns the line, the drop and the meter. On a larger property with a bigger service that distinction comes up whenever capacity is the question.
Oncor
The wires and metering company for this area. On a larger property the point that matters is capacity: increasing the incoming supply is Oncor's work, whatever retail plan you happen to be on.
Where a house genuinely needs more incoming capacity rather than just better distribution inside, that is work involving Oncor, and we say so at the quoting stage instead of discovering it later.
Permits & Inspection
Permitted With The City, Inspected On Site
Electrical work in Keller is permitted by the City of Keller and inspected before sign-off. On a larger property there is usually more to inspect — sub-panels, pool equipment, outbuildings — and more reason to have the record.
Custom houses are also where we most often find work added over the years by whoever was cheapest at the time. If we come across it, we tell you what it is rather than quietly working around it.
- Permitting authority
- City of Keller
- Electric utility
- Oncor — wires and meter
- County
- Tarrant County
- Licence on the permit
- Master Electrician TDLR 705467 · TECL 39791
What We Are Called Out For In Keller
On a large house the problem is rarely a single circuit. It is distribution — getting adequate power to several separate places, each with its own demands.
Electrical Panels
Main panels and, more to the point here, sub-panels. A pool house, a detached garage, a shop or a guest suite is usually better served by its own sub-panel than by long individual runs.
Wiring & Outlets
Pool and spa equipment, outdoor kitchens, gates, workshops and garden power. On a large lot the cable size is a calculation, not a default.
Home Lighting
Multi-zone interior lighting, architectural and landscape lighting across a larger plot, designed as a scheme rather than fitted room by room.
Smart Switches
Where it genuinely earns its keep. Keypads and scenes across a big house so you are not walking from room to room, designed and then commissioned properly.
EV Chargers
Often more than one. Two chargers in a large garage is a load calculation and sometimes a sub-panel, not simply two sockets.
Fault Finding
Large houses have more circuits, more junctions and more places a fault can hide. Methodical testing finds it faster than opening up the obvious places.
Ceiling Fans
High and vaulted ceilings, covered patios and porches. Rated boxes, proper bracing and access worked out before the ladder goes up.
Data Wiring
Structured Cat6 to a central cabinet, with points where a larger house actually needs coverage. Labelled, tidy and documented.
Work We Can Show You
Larger houses taken from plot to finished install — the nearest published work to a Keller property with several buildings to supply.
Fitted, commissioned and tested
Distribution inside a finished property
Service equipment and conduit outside
Day-to-day work across Frisco and North Dallas–Fort Worth. Jobs photographed in Keller will be added here as we build the record. See all projects
Keller Questions
Is a sub-panel better than running separate circuits to an outbuilding?
Usually, once there is more than one or two things to supply. A correctly sized feed to a sub-panel gives you capacity and local isolation in the building, instead of several long runs each with its own voltage drop. We will tell you which your situation actually calls for.
Can we run two EV chargers?
Often, but it is a load calculation first. Two Level 2 chargers is a substantial continuous load, and the answer depends on the service, the panel and what else the house runs. There are also ways of sharing capacity between chargers where a straight upgrade is not sensible.
Do you do pool and spa wiring?
Yes. Pool and spa equipment is permit-and-inspection work with specific requirements for bonding, isolation and GFCI protection. It is not an area to let anyone improvise in.
Is landscape lighting worth doing properly?
On a larger plot, very much. The difference between a scheme that lasts and one that fails in a season is the fittings, the cable, the glands and the transformer sizing — none of which is visible when it is new.
How far is Keller from your base?
We are in Frisco, so Keller is at the further end of our area, over in Tarrant County. Call Alex on +1 503 380 0024 and he will tell you straight whether it is a job for us.
Service Area
We Also Serve
ADP Electrical works across Frisco and the surrounding towns of North Dallas–Fort Worth. Not sure whether we cover you? Call and ask — we usually do.
Covering all nineteen towns in our service area, and often a little beyond. Ask if you are not listed.
Free Estimate
Get a Price For Work in Keller
Tell us how big the house is, what outbuildings there are and what you want powered — on a larger property that is what decides whether it is a circuit or a sub-panel.
Serving Frisco, Prosper, Celina, McKinney, Plano and North Dallas–Fort Worth.